Home >> Application >> By Standard >> ISO >> ISO 5000~9999 >> ISO 7509 GRP Pipe Sustained Internal Hydrostatic Pressure Test

ISO 7509 GRP Pipe Sustained Internal Hydrostatic Pressure Test

Share:

ISO 7509 GRP Pipe Sustained Internal Pressure Time to Failure Tester | UnitedTest

UnitedTest supplies ISO 7509 testing machines for glass-reinforced thermosetting plastics (GRP) pipes, performing long-term stress rupture tests under constant hydrostatic pressure and controlled temperature to record time to failure, supporting GRP pipe quality control, design validation and long-term pressure rating assessment.


ISO 7509 specifies a reliable laboratory test method to measure the time to failure of GRP pipe specimens subjected to constant internal hydrostatic pressure under precisely controlled temperature conditions. This is a long-duration stress-rupture test focused on creep and delayed failure behaviour, which differs fundamentally from short-duration burst pressure testing. The test can be carried out with air or water as the external surrounding medium, using water as the internal pressurising fluid. The resulting time-to-failure data helps engineers evaluate long-term creep performance, validate resin formulation, fibre reinforcement structure and manufacturing quality, and provides critical data for regression analysis and long-term hydrostatic design rating of GRP piping used in water supply, sewerage, chemical transfer and industrial pressure pipeline projects. UnitedTest’s ISO 7509 compliant test equipment features stable pressure control, constant temperature maintenance, automatic failure detection and continuous data logging for consistent, repeatable test results.


ISO 7509 Hydrostatic Pressure Testing Machine for pipe sample:
ISO 9080 Long Term Hydrostatic Pressure Test for Thermoplastic Pipe testing
Advanced Hydrostatic Pressure Testing Service/Equipment


Test Principle

A cut length of GRP pipe is sealed at both ends, filled with water (the reference internal liquid), and subjected to a specified constant internal hydrostatic pressure at a specified temperature. The pressure creates a state of stress in the pipe wall. The specimen is held at that pressure until it fails.

Key points of the principle:

  • The pipe wall stress state depends on end-loading conditions: whether the hydrostatic end thrust (axial tension generated by pressure acting on the end caps) is carried by the pipe wall itself or reacted by external tie rods.

  • Water is the reference internal test liquid. The external environment can be either air or water.

  • Time to failure is generally longer at lower pressures (stresses).

  • A series of tests at different pressure levels is typically run, and the resulting pressure-vs.-time-to-failure data is analyzed by regression (per ISO 10928) to extrapolate long-term performance (e.g., a projected failure pressure at 50 years, denoted p₅₀).

  • The standard itself does not prescribe the regression methodology; it only supplies the raw time-to-failure data points.


Specific test methods

TypeConfigurationStress state
Type 1Testing with end thrust (end caps, no tie rods carrying thrust)Hoop + longitudinal stress from internal pressure
Type 2Testing without end thrust, external sealsHoop-dominant; thrust carried externally
Type 3Testing without end thrust, internal sealsHoop-dominant; thrust carried externally


Test Specimen Information

  • Number: As specified in the referring product standard (ISO 7509 itself does not fix the count).

  • Free length L: A full cross-section of pipe; the free length between sealing devices is set by the referring standard.

  • Cutting: Ends must be smooth and perpendicular to the pipe axis.

  • Valid failure zone: Only failures occurring in the central portion of the pipe — outside the "end fixture influence zone" equal to 3.3 × √([DN] × e) — are counted as valid. Failures originating near the end seals are discarded because stress concentrations at the closures dominate the result at high (short-term) stress levels.


Test Equipment required for the ISO 7509 GRP Pipe Sustained Internal Hydrostatic Pressure Test

Pipe Hydrostatic Pressure Test System

Complies with ISO 1167‑1 and ISO 1167‑2, to apply constant internal hydrostatic pressure to pipe samples; Accuracy within ±1.0 % of the test pressure.

Applies pressure without entrapping air; maintains pressure within specified tolerance for the entire test duration; 

preferably automatic pressure-regulation; may pressure several pieces simultaneously if no interference on failure.

Enclosures

Capable of inducing the specified stress state — 

Either with end thrust (Type 1: pipe wall carries axial tension) or without end thrust (Type 2: external seals with tie rods; Type 3: internal seals with tie rods). 

Three typical configurations are shown in standard.

Temperature‑controlled bath & circulating pump

Maintains uniform temperature throughout the liquid; may require circulation.

Electrical resistance meter + circuit

Detects weeping by measuring resistance between the conductive internal test liquid and an external conductive layer (trigger level ≤ 3 MΩ).


Test Parameters:


ISO 7509 is a base method standard; the following parameters are intentionally left to the product/application standard that invokes it:

  • a) Whether end thrust is carried by the pipe wall (Type 1) or reacted externally (Type 2/3).

  • b) Free length L of the test piece.

  • c) Number of test pieces.

  • d) Test temperature and its tolerance.

  • e) Whether and what strain measurements are required.

  • f) External environmental fluid (water or air).

  • g) Internal environmental fluid if other than water.


General Test Procedures of ISO 7509 GRP Pipe Sustained Internal Hydrostatic Pressure Test

  1. Condition the specimen(s) at the test temperature for 24 h before testing, unless the referring standard overrides this.

  2. Set and stabilise the specified test temperature and tolerance.

  3. Measure pipe diameter, wall thickness and sample length per ISO 3126.

  4. Attach strain gauges if strain measurement is required, using ±2 % equipment.

  5. Fit the end-sealing devices (Type 1, 2 or 3 as required); fill completely with water or the specified test liquid; connect to the pressurizing system avoiding air entrapment. If water is the external environment, install the piece in the container so it is totally surrounded by water.

  6. Raise the internal pressure to the target within 5 min, then hold constant until failure; record the test period with the specified accuracy.

  7. Manage interruptions under the < 100 h rule, deducting interrupted time and noting it in the report.

  8. Detect failure by visible loss of test liquid, continuous pressure drop, or resistance ≤ 3 MΩ; classify as bursting / leaking / weeping; check the failure location against the valid failure zone and either discard the data point or repair and continue.

  9. Compile the test report, then pass the pressure–time data to ISO 10928 regression analysis to derive the long-term value.

ISO 9080 Long Term Hydrostatic Pressure Test for Thermoplastic Pipe testing


Related Standards: 

ASTM D2143

Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

ASTM D2992Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
ASTM D1598Time-to-failure under constant internal pressure (Procedure B)
ASTM D1599short-time hydraulic pressure (used to verify scaling of fittings/joints)
ISO 1167Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure
AWWA C950fiberglass pressure pipe (US water-works practice)
ISO 14692 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping
ISO 10467Product standard for GRP-UP pressure/non-pressure drainage & sewerage; invokes ISO 7509 to establish p₅₀.
ISO 7509Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of time to failure under sustained internal pressure
ISO 10639Product standard for GRP-UP pressure water supply; invokes ISO 7509.
ISO 25780Jacking GRP pipe standard; invokes ISO 7509.
EN 1447Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
ISO 9080Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ASTM D2837Obtains HDB/PDB for thermoplastic plastic pipe (similar statistical logic but for non‑reinforced thermoplastics, not fiberglass thermoset composites)


Industry fields of application

ISO 7509 applies to glass-reinforced thermosetting plastics (GRP) pipes — typically filament-wound or centrifugally cast pipes made with unsaturated polyester (UP), vinyl ester (VE), or epoxy resins reinforced with glass fiber. These pipes are used in:

  • Municipal water supply and drainage / sewerage (pressure and non-pressure).

  • Irrigation and agricultural water transmission.

  • Petroleum, natural gas, and offshore/onshore process piping (referenced by ISO 14692 series).

  • Industrial corrosive-fluid piping (chemical plants, desalination, power plant cooling water).

  • Jacking / trenchless installation projects (e.g., ISO 25780).

Product standards that invoke ISO 7509 include ISO 10467 (GRP-UP pressure/non-pressure drainage and sewerage), ISO 10639 (GRP-UP pressure water supply), and ISO 25780 (jacking pipes). These standards use ISO 7509 data to derive the p₅₀ — the projected failure pressure at 50 years — which in turn sets the allowable long-term working pressure.


Keywords: ISO 7509 tester, GRP pipe sustained internal pressure test, glass reinforced thermosetting plastic pipe stress rupture test, GRP pipe time to failure test, hydrostatic pressure creep test, GRP pipe long term pressure performance, fiberglass pipe pressure ageing test, reinforced thermoset pipe testing machine, GRP pipeline quality test, hydrostatic stress rupture equipment, sewer GRP pipe test, chemical resistant GRP pipe evaluation, constant pressure pipe test rig, UnitedTest pipe tester, GRP pipe design validation test, ISO 7509 test machine · ISO 7509 testing equipment · GRP pipe hydrostatic pressure tester · GRP pipe pressure testing machine · sustained internal pressure test rig · pipe time-to-failure test machine, constant internal pressure testing machine · GRP pipe long-term pressure test · multi-station pipe hydrostatic pressure tester · weeping failure detection equipment · Type 1/2/3 end thrust fixtures

Related products and device

ISO 7509 GRP Pipe Hydrostatic Pressure Testing Machine

hydrostatic pressure testing machine is designed according to ISO 1167, ASTM D1598, ASTM D1599. Under a stipulated constant hydrostatic pressure force, keeping provision time; or inside the pipe, apply a constant and rapid hydraulic pressure to make the specimen broken in a short period time, check the max. pressure force, then calculate the ring stress.

ISO 7509 GRP pipe long term pressure performance hydrostatic pressure tester constant temperature tank

Constant temperature water tank is a crucial piece of equipment for hydrostatic pressure tests, particularly for long-term and burst tests. It is designed to maintain a constant pressure and temperature during testing, which is essential for accurately assessing the strength and durability of pipe.

ISO 7509 GRP Pipe End cap of pipe pressure test

Stainless Steel End Caps For Pipe Hydrostatic Pressure and Burst Testing are designed for internal hydrostatic pressure testing of pipes and fittings. It is used to seal the sample in order to generate internal pressure in the sample, with the characters: ISO 1167 Type A structure.

Related Standard

ISO 1167 Thermoplastics pipes resistance to internal pressure test –

ISO 1167: 2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure.

ISO 1167 test method specifies a general test method for determining the resistance to internal hydrostatic pressure at a given temperature of thermoplastics pipes, fittings and piping systems for the transport of fluids. The method accommodates water-in-water, water-in-air and water-in-liquid tests. It defines uniform hydrostatic pressure testing to evaluate short-term and long-term pressure-bearing durability of thermoplastic fluid-transport piping systems.


Hydrostatic pressure testing is a valuable method for assessing the strength and integrity of pressurized systems, ensuring that they can meet operational demands without failure. Hydrostatic pressure testing can evaluate these items by filling pipelines, tanks, or containers with water before pressure is applied to detect any potential leaks or issues. 

Hydrostatic pressure tester is critical across multiple industries, from pipeline engineering to industrial piping. It helps prevent costly failures or leaks by verifying whether the system can safely reach the specified pressure levels.

ASTM D1598 test for long-term hydrostatic pressure of plastic pipe –

ASTM D1598 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure. It is a fundamental test method used to determine the long-term hydrostatic strength and resistance of thermoplastic pipe by applying a constant internal pressure until the pipe specimen fails (ruptures). Which is critical for establishing hydrostatic design basis and ensuring long-term pipeline reliability.

ASTM D2241 PVC SDR Pressure Rated Pipe Testing Methods –

ASTM D2241 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

ASTM D2241 governs SDR‑series PVC pressure pipes for pressurized water and chemically‑compatible pressurized liquids. The mechanical performance test include sustained pressure, burst pressure, flattening, extrusion quality and impact, plus marking rules.


ASTM D2143 Cyclic Pressure Test for Reinforced Thermosetting Plastic Pipe –

ASTM D2143 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

ASTM D2143 determines the failure characteristics of reinforced thermosetting plastic pipe under cyclic internal hydraulic pressure — i.e., how many pressure cycles a pipe survives at a given pressure/stress level. Its real purpose is not to pass/fail a single pipe, but to generate the stress‑vs‑cycles‑to‑failure data points that feed the regression analysis in ASTM D2992 Procedure A, from which the long‑term Hydrostatic Design Basis (HDB) and pressure rating of a pipe product are derived.


ASTM D2992 Fiberglass Pipe Hydrostatic Test for Obtaining Hydrostatic or Pressure Design Basis –

ASTM D2992 Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

ASTM D2992 is not a "pass/fail" test — it is a statistical extrapolation practice. It defines how to take short-term pressure-rupture data on fiberglass (GRP) pipe and fittings, fit a log-log regression line, and extrapolate it to a 50-year design life in order to publish a Hydrostatic Design Basis (HDB) or Pressure Design Basis (PDB) for that specific product and manufacturing process.

EN 1796 GRP-UP Pipe Mechanical & Pressure Test Methods –

EN 1796 Plastics piping systems for water supply with or without pressure — Glass‑reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)

EN 1796 is the European product/system standard for plastics piping systems for water supply with or without pressure, made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester (UP) resin. It covers pipes, fittings (bends, branches, reducers, saddles, flanged adaptors) and joints, classifies them by DN / PN / SN, and sets the type-test (TT) and batch-release (quality-control) test scheme that a manufacturer, a certification body or a third-party laboratory must run to prove a 50-year design life for buried (and, with care, non-buried) water pipelines.

It defines material composition (E‑glass/C‑glass/R‑glass reinforcement, UP resin, elastomer gaskets), wall‑layer construction (inner liner, structural layer, outer protective layer), dimensional tolerances, marking rules, mechanical performance, long‑term creep, hydrostatic pressure resistance and full joint performance requirements. 


ISO 13254 Plastic pipe and joints watertightness test by internal hydrostatic pressure –

ISO 13254 specifies a hydrostatic pressure test method for evaluating the watertightness of two categories of non-pressure thermoplastics components: (1) multi-piece fabricated products (e.g., custom-molded fittings) and (2) joints in thermoplastics piping systems.The test validates sealing performance under simulated service conditions for drainage, sewerage, and stormwater systems.

The standard aims to ensure consistent assessment of leak resistance, critical for applications like drainage, irrigation, and underground conduits where fluid ingress could compromise system integrity.

ISO 4437-1 Tensile, Hydrostatic pressure test for Plastics PE piping systems for the supply of gaseous fuels –

ISO 4437-1:2024 Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) Part 1: General

ISO 4437-1:2014 specifies the general properties of polyethylene (PE) compounds for the manufacture of pipes and fittings intended to be used for the supply of gaseous fuels. It also specifies the test parameters for the test methods referred to in this International Standard.   

ASTM D1598, D1599 Plastic Pipe Constant or short time pressure testing methods –

ASTM D1598: Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure.

ASTM D1598 test method covers the determination of the time-to-failure of both thermoplastic and reinforced thermosetting/resin pipe under constant internal pressure.This test method provides a method of characterizing plastics in the form of pipe under the conditions prescribed.


ASTM D1599: Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings.

ASTM D1599 test method establishes the short-time hydraulic failure pressure of thermoplastic or reinforced thermosetting resin pipe, tubing, or fittings. Data obtained by this test method are of use only in predicting the behavior of pipe, tubing, and fittings under conditions of temperature, time, method of loading, and hoop stress similar to those used in the actual test. They are generally not indicative of the long-term strength of thermoplastic or reinforced thermosetting resin pipe, tubing, and fittings


ASTM D1599 Pipe short-time hydraulic burst pressure test –

ASTM D1599 is titled "Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings." It is a fundamental short-term, destructive pressure test used to determine the ultimate failure pressure (often called the "burst pressure") of thermoplastic pipe, tubing, or fittings under rapidly applied internal pressure at a specified temperature. Typically completed within 60–70 seconds, mainly for quality control and short-term design validation. 

EN 1447 long-term internal pressure test for GRP, GRE and fiberglass pipes –

EN 1447 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure

EN 1447 specifies a method for determining the time to failure of GRP pipes subjected to internal hydrostatic pressure at a specified temperature, with the external environment being air or water. For any other internal or external environment, the referring standard must specify additional requirements.

FAQ — ISO 7509 GRP Pipe Sustained Internal Pressure Test

Q1: What is ISO 7509?

A: ISO 7509:2015 is the international standard titled "Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure." Developed by ISO/TC 138/SC 06, it specifies a laboratory method for measuring how long a GRP pipe — typically made from unsaturated polyester (UP), vinyl ester, or epoxy resin reinforced with glass fiber — survives under a constant internal hydrostatic pressure at a controlled temperature.
Unlike a short-term burst test, ISO 7509 is a long-term stress-rupture test. A cut length of GRP pipe is sealed at both ends, filled with water, and held at a specified pressure until it bursts, leaks, or weeps. The resulting time-to-failure data at multiple stress levels is analyzed by regression (per ISO 10928) to extrapolate the pipe's projected failure pressure at 50 years (p₅₀), which forms the basis for the safe long-term working pressure rating of GRP piping systems used in municipal water supply, sewerage, irrigation, oil and gas, and industrial corrosive-fluid applications.


Q2: What is the difference between ISO 7509 and a burst test?

A: A burst test pressurizes a pipe rapidly until it breaks, giving only a short-term failure pressure. ISO 7509 holds the pipe at a constant, lower pressure for a long duration (hours to months) to capture time-dependent creep-rupture behavior. Multiple pressure levels are tested and extrapolated (per ISO 10928) to predict 50-year performance.


Q3: What internal and external fluids are used in ISO 7509?

A: The standard uses water as the reference internal test liquid. The external environment can be either air or water (immersion bath). Other internal or external fluids may be specified by the referring product standard.


Q4: What are the three types of end-seal arrangements?

A: Type 1 — testing with end thrust carried by the pipe wall (simulates restrained/flanged joints). Type 2 — testing without end thrust, using external seals and tie rods. Type 3 — testing without end thrust, using internal seals and tie rods. Types 2 and 3 simulate unrestrained bell-and-spigot joints.


Q5: How is failure detected in ISO 7509?

A: Failure is defined as bursting, leaking, or weeping. Bursting and leaking are detected visually or by loss of test liquid / pressure drop. Weeping (micro-permeation through the liner) is detected electronically by measuring the electrical resistance between the internal conductive test liquid and an external conductive foil; failure is triggered when resistance drops to ≤ 3 MΩ.


Q6: What is the "valid failure zone" and why does it matter?

A: The valid failure zone is the central portion of the pipe, excluding the end-fixture influence zone of 3.3 × √([DN] × e) millimeters from each end. Failures occurring in the end-influence zone are discarded because stress concentrations at the end seals dominate the result and do not represent the pipe wall's true long-term performance.


Q7. Which pipes and materials does ISO 7509 apply to?

A: It applies to glass-reinforced thermosetting plastics (GRP) pipes — for example filament-wound or centrifugally cast GRP, including GRP systems based on unsaturated polyester (UP) resin. The test piece is a full section of the pipe, not a machined coupon. It is not the standard for thermoplastic pipes (those are covered by ISO 1167 / ASTM D1598) and it is not a fittings-only test method.


Q8. Why is the ISO 7509 test important for GRP as a material?

A: Because GRP strength is strongly time-dependent. A glass-fibre/thermoset laminate creeps, undergoes stress rupture and loses strength through water ingress at the fibre–resin interface, so a short-term burst test cannot define a 50-year design pressure. Published sustained-pressure studies on GRP pipes have predicted 50-year failure pressures of roughly 57 % of the initial short-term performance, and wet strength of about 45–60 % of dry short-term strength after long immersion. ISO 7509 generates the multi-pressure, multi-time data that ISO 10928 regression uses to establish long-term failure/design pressures, PN ratings and safety factors (for example FS_min = 1.5 and FS_mean = 1.8 with 50-year extrapolation in ISO 23856:2021). Without it, a GRP pressure pipe would have to be grossly over-designed or accepted with an unverified service life.


Q9. What should I look for when buying an ISO 7509 testing machine?

A: Look for a constant internal pressure (hydrostatic time-to-failure) test rig with: individual per-station pressure control and isolation so one specimen's failure cannot disturb the others; automatic pressure maintenance/re-pressurisation over months of continuous running; long-duration timers and uninterrupted data logging with power-failure recovery; a uniform, circulating temperature-controlled water bath or an air environment cabinet; end-sealing fixtures for Type 1 (with end thrust) and Type 2/3 (without end thrust); pressure range and DN/specimen length capacity matching your product range; calibrated pressure transducers at ±1,0 % of test pressure or better; and optional resistance-monitoring channels (≤ 3 MΩ) and strain-gauge inputs. Ask the supplier to confirm the end-fixture designs, the achievable temperature uniformity and the report/data export format against your referring standard.


Q10. How long does an ISO 7509 test programme take?

A: ISO 7509 does not fix a duration — you hold pressure until failure. A single specimen may fail in minutes at high pressure or run for many thousands of hours at low pressure. A complete programme uses a series of pressure levels spanning various failure times (commonly up to ~10,000 h of data) to build the regression line for 50-year extrapolation under ISO 10928. The standard notes that for some nominal sizes above DN 500 the test duration may need to be increased for practical reasons.


Q11. Can one testing machine cover ISO 7509, ISO 1167 and ASTM D1598?

A: Often yes at the platform level, because all three are constant-internal-pressure, temperature-controlled, time-to-failure methods — but they are not identical. ISO 7509 is GRP-specific and adds end-thrust variants, weeping/≤ 3 MΩ detection and the valid-failure-zone rule; ISO 1167 and ASTM D1598 focus on thermoplastic and reinforced thermosetting/resin pipe with different end-cap conventions, temperature defaults and failure definitions. A modular rig with changeable end fixtures, selectable pressure ranges, configurable failure-detection inputs and standard-specific report templates can serve several methods, but short-time burst (ASTM D1599 / GB/T 15560) and cyclic pressure (ASTM D2143) usually need different control logic. Always confirm the exact standard configuration with the manufacturer before ordering.


Q12. Why choose ISO 7509 GRP pipe hydrostatic pressure test machine with multi-station constant pressure control from UnitedTest? 

A: UnitedTest is a specialized manufacturer of polymer and composite material testing equipment, supplying hydrostatic pressure testers, tensile testers, impact testers, and thermal analysis instruments to pipe manufacturers, material laboratories, and quality assurance teams across more than 40 countries. Our ISO 7509-compliant hydrostatic pressure test rigs are engineered for continuous long-duration operation, modular end-seal configurations, and automated data acquisition — helping customers meet the most demanding GRP pipe certification requirements.


UnitedTest manufactures ISO 7509 hydrostatic pressure testing machines for determining the time to failure of glass-reinforced thermosetting plastics (GRP) pipes under sustained internal pressure. Our constant internal pressure test rigs hold a full pipe section at a specified pressure and temperature until bursting, leaking or weeping occurs — producing the pressure–time data that ISO 10928 regression uses to establish long-term design pressures and PN ratings.

Designed for GRP pipe producers, third-party laboratories and certification testing, each system combines individual station pressure control, uniform temperature conditioning, interchangeable with-end-thrust and without-end-thrust end fixtures, long-duration timers and data logging, and optional strain and ≤ 3 MΩ weeping-detection channels. Looking for an ISO 7509 test machine, a GRP pipe pressure tester, or a multi-station sustained pressure test rig? Contact UnitedTest for a configuration and quotation.

< Previous: ISO 7438 Metallic materials Bending test details

> Next: ISO 7539-7 slow strain rate testing metals and alloys stress corrosion

Require More Customized Solutions?

We offer customization to meet your specific needs. Our expert team will collaborate with you to develop the perfect product for you
Customize Now

Beijing United Test Co., Ltd.