Home >> Application >> By Standard >> Others >> EN 10234 Drift Expanding Test for Metallic Tubes

EN 10234 Drift Expanding Test for Metallic Tubes

Share:

EN 10234 Metallic Tube Drift Expanding Test Machine | UnitedTest

UnitedTest manufactures EN 10234 compliant drift expanding testers for circular metallic tubes. Evaluate radial plastic deformation and cracking resistance at tube ends, for steel and aluminium alloy tubes within defined OD and wall thickness limits.


EN 10234 Metallic materials specifies the drift or cone expanding test procedure to assess the radial plastic deformation capacity of circular cross-section metallic tube ends, identifying the expansion limit before cracking occurs. The default scope covers outer diameter ≤150 mm, while light metals including aluminium alloys are limited to ≤100 mm, with wall thickness ≤10 mm. Relevant product standards may impose tighter dimensional limits. UnitedTest supplies robust drift expanding test rigs for metal pipe mills, alloy tubing manufacturers and accredited material testing laboratories.


Test Principle: 

A short length of tube (a test piece cut from the tube end) is expanded by forcing a conical mandrel (drift) axially into the open end under compressive load, without shock and without rotation, until the outside diameter of the expanded portion reaches the value (or percentage expansion) specified in the product standard.

The physical meaning: the tube wall is subjected to circumferential (hoop) tensile strain plus bending/through-thickness strain. The test therefore measures ductility and soundness of the tube wall under radial tensile deformation, and it exposes laminations, inclusions, weld defects, seams, and poor heat-treatment condition that a tensile test on a machined coupon would not reveal.


Test Specimen Information:

Dimentsions: 

  • If mandrel cone angle ≤ 30°: specimen length (L≈2D) (D = original outer diameter of tube).

  • If mandrel cone angle >30°: specimen length (L≈1.5D).

  • After expansion, the remaining cylindrical portion of the specimen shall be at least 0.5D in length.


EN 10234 Drift Expanding Test for Metallic Tubes required Testing Equipment: 

Test Machine

A variable-speed press or a universal testing machine capable of controlled, constant-rate axial displacement

Conical mandrel (drift)

A conical mandrel (drift) whose cone angle is as specified in the product standard; its working surface must be sufficiently hard and smooth/polished.

For longitudinally welded tubes, the mandrel may be provided with a groove to accommodate the internal weld flash.

Ancillary: cutting/parting-off equipment, a file or chamfering tool for edge rounding, and dimensional measuring equipment for D, T, L and C

ISO 8493 Metal Tube Drift Expanding Test


Key Parameters and Stipulations

DOriginal outer diameter of tube, unit: mm
TTube wall thickness, unit: mm
CMaximum outer diameter after expansion, unit: mm
BCone angle of mandrel, unit: degree (30°,45°,60° preferred)
Mandrel penetration rateMaximum 50 mm/min
Expansion degreeExpanded‑diameter percentage (C/D) is specified by relevant product standards


Key Test Procedures:

  1. Condition the specimen and verify ambient temperature (10–35 °C, or (23 ± 5) °C for controlled testing).

  2. Measure and record D, T and L; select the mandrel angle β and the target expansion (C or % ΔD) required by the product standard.

  3. Align the mandrel axis with the tube axis; lubricate the mandrel if desired.

  4. Press the mandrel into the tube end smoothly, without shock or vibration, at a rate not exceeding 50 mm/min (this limit is binding in case of dispute), until the specified outside diameter is reached.

  5. Do not rotate the mandrel relative to the test piece during penetration.

  6. Interpret the result: remove the piece and examine the expanded region (unaided eye).

  7. Report the result.


Industry Application Fields:

The drift expanding test is a routine quality-control / acceptance test in every sector where tube ends are expanded, flared, flanged or roll-expanded into tube sheets:

  • Pressure equipment: boiler tubes, superheater and reheater tubes, steam piping (EN 10216 series seamless, EN 10217 series welded) — driven by the PED 97/23/EC / 2014/68/EU.

  • Heat exchangers and condensers: tube-to-tubesheet expansion is the dominant joining method, so expansion ductility is decisive — including stainless steel and copper-alloy tube (EN 12451, ASTM A249).

  • Hydraulic and pneumatic power systems: cold-drawn precision tube (EN 10305-1/-4), where tube ends are flared or formed for fittings.

  • Automotive, mechanical and general engineering: precision steel tube (DIN 2391 heritage), structural and mechanical tubing.

  • Aerospace and shipbuilding: referenced in aerospace material inspection procedures (BS 5T 100, BS 3TA 100, BS 2B 100) and in classification society rules for metallic materials.

  • Tube mills and third-party/laboratory inspection bodies, product-standard committees and purchasers' inspection engineers.

Related standard: 

EN 10232Metallic Materials - Tube (in Full Section) - Bend Test
IS 2328 (India standard) — corresponds to ISO 8492
ASTM B968flattening of copper and copper-alloy pipe and tube.
ISO 7438General bend test for flat metal strip/sheet specimens.
TCVN 5891Metallic materials. Tube (in full section).Bend test
ISO 8491Tube (in full section) bend test, bend rather than flatten
ISO 8492Metallic materials. Tube. Flattening test
ISO 8493Metallic materials - Tube - Drift-expanding test

GOST 8695

Metal pipes. Flattening testing method
EN 10233Metallic materials. Tube. Flattening test
EN 10234Metallic materials; Tube; Drift expanding test
DIN 50136

German Flattening test


Why This Test Matters for a Material

  1. It measures what tensile testing cannot. A standard tensile coupon is machined flat and taken longitudinally; it misses the through-thickness and circumferential behaviour of the tube wall, and it averages over a small volume. The drift expanding test strains the whole circumference of a real tube section — so it catches laminations, seams, laps, non-metallic inclusions, weld-flash defects, and surface tearing oriented along the tube axis.

  2. It validates the actual fabrication operation. Many tubes are joined by expansion into tubesheets, flaring, flanging or socket/bell connections. The test simulates that deformation directly, so it predicts cracking during assembly rather than only reporting a generic elongation value.

  3. It is sensitive to metallurgical condition. Annealed/normalized tube expands well; over-hard, strain-aged, over-cold-worked, or improperly heat-treated tube cracks early. This is why product standards restrict the test to specific delivery conditions (e.g. annealed or normalized).

  4. It qualifies the weld. For welded tube, expansion of the end puts the weld line under hoop tension; the requirement to machine the internal bead flush (or use a grooved mandrel) makes the test a genuine check of weld-zone ductility and fusion quality.

  5. It is cheap, fast and go/no-go. Short specimen, simple tooling, no extensometry — ideal for batch release testing, third-party inspection, and dispute resolution (hence the explicit 50 mm/min rate limit for arbitration).

  6. It underpins safety-critical compliance. Under the Pressure Equipment Directive, demonstrating suitable ductility/plastic deformation capability is an essential safety requirement, and EN 10234/EN ISO 8493 is one of the standardised means of showing it.


Keywords: EN 10234 tester, metallic tube drift expanding test machine, metal pipe cone expansion tester, steel tube end expansion test rig, aluminium alloy tube drift expanding equipment, circular tube radial deformation tester, seamless tube expansion cracking test fixture, light metal tubing ductility tester, boiler tube drift expanding quality verification machine, pressure vessel tubing expansion performance test system, tubular product end forming qualification tester, metal tube plastic expansion testing machine

Related products and device

EN 10234 Metal Tube Drift Expanding Test Universal Testing Machine

WDW Series Computer Control Electronic Universal Testing Machine made by UNITEDTEST range from 100N to 600KN load capacity with various models like single columns, table type, door frame type etc., is used to perform tension, compression, flexure/bending, shearing, peeling etc., test for metal and nonmetal specimens.

EN 10234 aluminium alloy tube expansion test equipment, circular tube plastic deformation tester

Compression test fixture is used to investigate the compressive behaviour of the test specimens and for determining the compressive strength, compressive modulus and other aspects of the compressive stress/strain relationship under the conditions defined.

Related Standard

ISO 8493 Metal Tube Drift Expanding Test –

ISO 8493 Metallic materials - Tube - Drift-expanding test

ISO 8493 specifies a method for determining the ability of metallic tubes of circular cross-section to undergo plastic deformation in drift expansion.

Applicability limits (default, unless the relevant product standard narrows them further):

  • Outside diameter D ≤ 150 mm (≤ 100 mm for light metals such as aluminium alloys)

  • Wall thickness a ≤ 10 mm


ISO 8491 Metal Tube Bend Test –

ISO 8491 define a unified bend test method for evaluating the plastic bending ductility of circular full-section metallic tubes, exclusively for tubes with outer diameter D ≤ 65 mm (product standards may narrow this diameter range further). 

Main Industry fields: boilers & pressure vessels, oil & gas pipelines, automotive (exhaust/chassis tubing), heat exchangers, structural steel tubing, power generation (including nuclear).

ISO 8492 Metal Tube Flattening Test –

ISO 8492 Metallic materials — Tube — Flattening test

ISO 8492 is a method for determining the ability of metallic tubes of circular cross-section to undergo plastic deformation by flattening; it may also be used to reveal defects in the tubes. ISO 8492 defines how to flatten; how far to flatten (distance H), where the weld goes, and what counts as failure are delegated to the relevant product standard or purchase order.

EN 10232 Metallic Tube Bend Test in Full Section –

EN 10232 is the European version of ISO 8491,defines a unified cold bend test for intact circular full-section metallic tubes, designed to quantify plastic bending ductility for tubes with outer diameter D ≤ 65 mm. 

ASTM A500 Cold-Formed Steel Tube & Section Mechanical Testing –

ASTM A500 covers carbon steel tubing in round, square, rectangular, or special shapes, primarily used for welded, riveted, or bolted construction in bridges, buildings, and general structural applications. It specifies four mandatory test categories, tension test, flattening test, Chemical Composition Analysis and Dimensional & Visual Inspection.  For us, will focus on the mechanical test. 

ASTM D2105 Longitudinal Tensile Test for Fiberglass Pipe & Tube –

ASTM D2105 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass‑Fiber‑Reinforced Thermosetting‑Resin) Pipe and Tube

ASTM D2105 determine the comparative longitudinal tensile properties of a fiberglass pipe specimen by pulling it in axial tension to failure under defined conditioning, temperature, and machine‑crosshead‑speed conditions.

ASTM F2663 – Bead Unseating of Tubeless Passenger and Light Truck Tires –

ASTM F2663 Standard Test Method for Bead Unseating of Tubeless Passenger and Light Truck Tires

ASTM F2663 quantify the resistance of tubeless tires against bead unseating, which means the tire bead slipping off the rim flange leading to sudden air loss. It covers passenger tires, light‑truck tires, and temporary spare tires. It only defines test methodology, not mandatory performance limit values for tires.

ASTM A370 Test method for mechanical testing of steel –

ASTM A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products


ASTM A370 test methods cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications. Variations in testing methods are to be avoided, and standard methods of testing are to be followed to obtain reproducible and comparable results. In those cases in which the testing requirements for certain products are unique or at variance with these general procedures, the product specification testing requirements shall control.


Covering tests like Tension, Bend, Hardness, Brinell, Rockwell, Portable, and Impact, each catering to distinct aspects of mechanical property assessment. Moreover, it accommodates annexes for specific product types, including Bar Products, Tubular Products, Fasteners, Round Wire Products, and more, ensuring a holistic approach to testing.


FAQs for EN 10234 Drift Expanding Test (Metallic Tube Expansion Test)

Q1: What is EN 10234 drift expanding test used for? Why is this test important?

A1: EN 10234 drift expanding test evaluates the plastic deformation capacity of circular metallic tube ends under conical‑mandrel expansion. It simulates real‑world tube‑end forming operations such as flaring, expanding and assembly. This test reveals material ductility and weld‑zone performance for seamless and welded tubes, prevents end‑cracking risk in downstream production, and provides quality‑control evidence for tube batch acceptance for European‑market tube products.


Q2: What tube dimensions does EN 10234 apply to?

A2: General scope: outer diameter ≤ 150 mm; for lightweight‑metal tubes outer diameter ≤ 100 mm; wall thickness ≤ 10 mm. Exact working ranges shall follow relevant product standards, which may narrow down these limits.


Q3: What specimen length should I prepare for EN 10234 test?

A3: Specimen length depends on mandrel cone angle:

  • Mandrel angle ≤ 30°: specimen length L ≈ 2D (D = original outer diameter)

  • Mandrel angle > 30°: specimen length L ≈ 1.5D Rule: after expansion, remaining cylindrical section must keep minimum length 0.5D. Shorter specimens are allowed only if this residual‑cylinder requirement is met.


Q4: What are the permitted mandrel angles for EN 10234?

A4: Preferred standard mandrel angles: 30°, 45°, 60°. The exact angle shall follow product‑standard specifications. For longitudinally welded tubes, slotted mandrels are required to accommodate internal weld bead protrusions and avoid weld damage during testing.


Q5: What temperature and loading speed rules does EN 10234 specify?

A5: General ambient‑test temperature range: 10 °C ~ 35 °C. For controlled‑condition testing: 23 ± 5 °C. Mandrel penetration rate shall not exceed 50 mm/min. Vibration and mandrel rotation against tube specimen are strictly forbidden during compression loading.


Q6: How do I judge pass or fail for EN 10234 drift expanding test?

A6: Follow product‑standard acceptance criteria first. If no specific criteria are given in product standards: specimen passes if no obvious end cracking appears. Minor small‑edge‑only chipping or local minor edge damage shall NOT be taken as rejection grounds.


Q7: What special preparation work is needed for welded tube specimens?

A7: For welded tubes, internal weld flash / weld reinforcement should be removed before testing. Test‑end edges should be chamfered or rounded; unrounded edges are acceptable only when test results satisfy pass criteria.


Q8: Which related standard does EN 10234 reference? Has EN 10234 been superseded?

A8: EN 10234 references ISO 3545‑1:1989 for tube‑dimension symbolic notation. EN 10234:1993 is a withdrawn European standard and is superseded by EN ISO 8493 (Metallic materials — Tube — Drift expanding test). Many European manufacturers and labs still run testing following EN 10234‑defined practical procedures for legacy product specifications.


Q9: What items must be included inside the EN 10234 test report?

A9: Mandatory report contents: reference to this European standard; tube part identification; tube dimension data; expanded maximum outer diameter C or expansion percentage ratio C/D; mandrel cone angle; final pass‑or‑fail test result.


Q10: What machine can perform EN 10234 drift expanding test?

A10: Variable‑speed press machine or universal testing machine configured with qualified hardened, smooth conical mandrel tooling. UnitedTest manufactures complete EN 10234‑compliant tube drift expanding test machines with matched mandrel sets for steel, aluminium, copper and alloy tubes.


Q11: Why choose EN 10234 / EN ISO 8493 Drift Expanding Test Machine for Metallic Tubes from UnitedTest? 

A11: UnitedTest manufactures EN 10234 compliant drift expanding test machines for metallic tubes. Universal tube‑end plastic deformation testers for steel, aluminium and welded tube quality‑control testing.


UnitedTest is a professional manufacturer of EN 10234 drift expanding test machines, designed for metallic tube plastic‑deformation evaluation in compliance with EN 10234 and superseded standard EN ISO 8493 requirements.

Our tube drift expanding test equipment is widely used for quality‑control labs, tube mills, metal‑product factories and third‑party inspection institutes to conduct tube‑end expanding tests for seamless steel tubes, welded steel tubes, aluminium alloy tubes, copper tubes and other circular‑cross‑section metallic tubing.

The UnitedTest EN 10234 tube expanding tester adopts variable‑speed compression loading system, supports maximum penetration speed control ≤ 50 mm/min as required by EN 10234 standard. We supply interchangeable hardened conical mandrel tooling sets (30°, 45°, 60° angles), including slotted mandrels specially for longitudinal welded tubes.

Key test capability matches EN 10234 standard rules:

  • Test tube outer diameter up to 150 mm, lightweight‑metal tube up to 100 mm; wall thickness up to 10 mm

  • Real‑time recording of expanding force, displacement and expanded outer‑diameter data

  • Output complete test reports covering all mandatory EN 10234 reporting items

  • Temperature‑adaptive operation for lab ambient‑temperature drift expanding test

Whether you need stand‑alone drift expanding test equipment or multi‑function universal testing machine add‑on expanding modules, UnitedTest provides custom‑configured testing solutions for European‑standard tube mechanical performance inspection. Contact us for quotation and technical specification datasheet of our EN 10234 tube expanding test machine.

< Previous: EN 13770 Test — Abrasion Resistance of Knitted Footwear Garments Explained

> Next: EN 10233 Tube Flattening Test Method, Specimen, Equipment and Test Machines

Require More Customized Solutions?

We offer customization to meet your specific needs. Our expert team will collaborate with you to develop the perfect product for you
Customize Now

Beijing United Test Co., Ltd.