Information on the most widely used ASTM standards within the materials testing industry
ASTM D3849 Carbon Black Morphology TEM Analysis Tester | UnitedTest
UnitedTest supplies ASTM D3849 compliant testing equipment for morphological characterization of carbon black using transmission electron microscopy, measuring primary particle and aggregate size with fractal geometry for rubber, pigment and carbon black laboratory quality control.
ASTM D3849 Standard Test Method for Carbon Black‑Morphological Characterization of Carbon Black Using Electron Microscopy
ASTM D3849 defines the test for the digital measurement of carbon black particle size statistics via transmission electron microscopy. The method makes use of fractal geometry to derive particle size statistics for both aggregates and primary particles using only measured values of aggregate perimeter and area. It covers two core parts: (1) semi‑quantitative morphological characterization (particle and aggregate size, shape) of carbon black via transmission electron microscopy (TEM); (2) mean‑particle‑size (MPS) certification using Statistical Thickness Surface Area (STSA) correlation instead of raw‑TEM data.
UnitedTest manufactures professional carbon black morphology analysis systems meeting ASTM D3849 requirements for carbon black R&D, production inspection and material certification.
Test Principle
Contrast & segmentation. Carbon black is imaged in mass‑thickness contrast; grey levels inside a feature get darker as particle size decreases. Thresholding separates feature from background; erosion followed by dilation (1 px depth, 1–2 cycles) smooths boundaries; objects <50 px area are rejected as noise; a guard frame handles aggregates touching the image border without biasing the distribution.
Stereological/fractal conversion. Only two measurements per aggregate — area A and perimeter P — are required; everything else is derived.
The two test methods in detail
Method A — Morphological Evaluation (Semi‑Quantitative) via TEM
This method obtains particle‑size, aggregate‑size and shape parameters from TEM images. It is intra‑laboratory descriptive only and not suitable for formal certification or cross‑lab specification purposes, because TEM shows poor inter‑laboratory reproducibility. Four sample‑dispersion workflows are included:
Dry carbon black dispersed by ultrasonic bath
Dry carbon black dispersed by ultrasonic probe
Carbon black recovered from vulcanized rubber by pyrolysis
Carbon black dispersed within CAB (cellulose acetate butyrate) chip prepared by two‑roll‑mill high‑shear mixing.
Method B — Mean Particle Size Certification via STSA Correlation
TEM‑derived MPS cannot be used for certification because magnification, thresholding and other TEM parameters can bias results. Instead, Method B uses STSA (Statistical Thickness Surface Area) measured by nitrogen adsorption (ASTM D6556) to certify MPS for plastic weatherability applications. Fixed STSA thresholds map to commercially‑accepted certified maximum MPS levels (≤20 nm, ≤25 nm) for wire‑and‑cable jacketing and pipe plastics. These thresholds are built on real‑world weathering performance rather than direct TEM‑STSA mathematical fitting.
Test Specimen Information
| Support | 3 mm, 200–300 mesh grid carrying a thin evaporated carbon film on a poly(vinyl formal) backing (Annex A1: 0.25 % PVF in 1,2‑dichloroethane, floated on water, grids placed shiny‑side up, carbon‑coated, then a‑c glow discharged at 13–20 Pa, ~1500 V, 3 min to improve wetting) |
| Deposition | One drop of final dispersion, film side up, from ~12 mm height, near grid centre; dry ~1 min on filter paper |
| Environment | Dry box if room RH > 30 %; UHP N₂ purge if RH > 35 % (probe route) |
| Mass / volume | 8–10 mg in 1 cm³ (bath) · 5–10 mg in 20 cm³ (probe) · ~25 mg CAB chip section in 1 cm³ |
| Population | About 2000 aggregates per sample, from adjoining fields tracked in a straight line across a grid opening |
| Post‑treatment | Formvar/CAB‑bearing grids are pyrolyzed (>550 °C, inert) before imaging |
| Check | Re‑run a standard carbon black of similar particle size at the same magnification to verify microscope/camera/software |
Test Equipment of ASTM D3849 Carbon Black Morphological Characterization by Electron Microscopy
| Transmission Electron Microscope (TEM) | point‑to‑point resolution ≥1.0 nm; operating voltage 60‑120 kV; liquid‑nitrogen anti‑contamination cold finger; CCD digital camera for image capture |
| Image‑analysis system | Minimum 640 × 480‑pixel resolution camera, frame‑grab hardware, software supporting background‑noise removal, thresholding, erosion‑dilation morphological operations, area/perimeter measurement and data storage |
| Sample‑preparation hardware | Two‑roll mill, vacuum evaporator (capable of 1.3 mPa vacuum plus AC glow‑discharge function), ultrasonic bath or ultrasonic probe generator, dry box (RH ≤30 %), analytical balance (accuracy ~0.5 mg), electrically‑heated tube furnace / pyroprobe for pyrolysis, carbon‑coated TEM specimen grids (3 mm, 200‑300 mesh), fine tweezers, micro‑spatula, glassware, high‑speed centrifuge (15 000‑20 000 r/min) and related consumables |
Key Test Parameters
TEM magnification & resolution: select magnification so the field‑of‑view covers the largest aggregates while resolving primary particles. For high‑resolution cameras, resolution target is typically 5.0‑6.0 nm per pixel; resolution is verified with calibration grating (e.g. 2160 lines/mm) at eucentric stage position. Convert pixel units to physical nm/nm² for calculations.
Dispersion parameters:
Ultrasonic bath: sonication time 3‑5 min, temperature controlled with ice to avoid over‑heating solvent.
Ultrasonic probe: power 40‑50 W, sonication 10 min in ice‑water bath.
Pyrolysis temperature: >550 °C for grid cleaning; 800‑900 °C for rubber‑matrix decomposition under inert atmosphere, no oxygen ingress allowed.
Image‑analysis parameters: erosion‑dilation cycles 1‑2 cycles (1‑pixel depth); reject objects below defined pixel‑area threshold to filter noise; apply guard‑frame rules to handle partial aggregates touching image borders; count minimum 2000 aggregates for statistical dataset.
Calculated output parameters:
Particle‑related: mean particle size m, weight‑mean particle size wn, particle‑size heterogeneity index hi, EMSA surface area.
Aggregate‑related: mean aggregate size M, weight‑mean aggregate size WM, aggregate heterogeneity index HI.
Method B certification thresholds: STSA ≥80 m²/g → certified MPS ≤20 nm; STSA ≥65 m²/g → certified MPS ≤25 nm. STSA is reported to 0.1 m²/g precision.
Step-by-Step Test Procedures
Sample preparation: Select corresponding dispersion procedure: dry‑black ultrasonic bath / probe; CAB‑chip dissolution; or rubber‑compound pyrolysis recovery. Adjust solvent dilution and sonication to achieve acceptable dispersion concentration.
Grid preparation: Drop‑cast one dispersion drop (~12 mm drop height) onto carbon‑coated TEM grid; dry. Remove residual polymer (CAB/formvar) by inert‑atmosphere pyrolysis if needed.
Instrument setup: Calibrate TEM magnification with grating, set suitable voltage and magnification, configure image‑analysis software thresholds, erosion‑dilation, noise‑rejection rules and guard‑frame.
TEM data acquisition: Insert grid, eucentric height adjustment, focus and stigmate at higher magnification. Acquire sequential adjacent image fields following linear tracking pattern, until data for approximately 2000 aggregates is collected.
Image processing & computation: Measure projected area A and perimeter P for valid aggregates. Apply standard stereological formulas to calculate particle‑ and aggregate‑distribution statistics.
Verification: Run a reference carbon‑black sample to confirm system performance.
Report: Document dispersion method, aggregate count, mean/weight‑mean sizes, heterogeneity index and EMSA value

Measure STSA of carbon‑black sample following ASTM D6556 (nitrogen‑adsorption test method).
Compare measured STSA with certification threshold table. Assign certified maximum MPS level.
Report sample ID, STSA value and certified maximum MPS level.
Related & Similar Standards
| ISO 18553 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| ASTM D5596 | Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics |
| GB/T 18251 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| NF T51-142 | Plastics. Polyethylene and polyethylene copolymere compounds. Evaluation of the degree of dispersion of carbon black. Test method. |
| IEC 60811-607 | Electric and optical fibre cables — Test methods for non-metallic materials — Part 607: Physical tests — Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
| MS 1442 | Methods of test for the assessment of carbon black dispersion in polyethylene using a microscope |
| ASTM D3849 | Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy |
| KS K 0759 | Test method for carbon black dispersion of polyolefin geosynthetics |
| ASTM D6556 | Test Method for Carbon Black — Total and External Surface Area by Nitrogen Adsorption. Provides STSA values essential for Test Method B of D3849‑22ASTM Inter... |
| ISO 11345 | Rubber - Assessment of carbon black and carbon black/silica dispersion - Rapid comparative methods |
| ASTM D2663 | Standard Test Methods for Carbon Black—Dispersion in Rubber |
Keywords: ASTM D3849 tester,carbon black morphological characterization,carbon black TEM analysis system,carbon black particle size tester,carbon black aggregate size measurement,transmission electron microscopy carbon black test,carbon black mean particle size MPS test,STSA correlation carbon black,fractal geometry particle analysis,carbon black pigment lab equipment,carbon black rubber filler testing,carbon black morphology test machine,UnitedTest particle analysis equipment,carbon black aggregate perimeter area measurement,carbon black quality control tester
Related products and device
Related Standard
ISO 18553 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds.
ISO 18553 standard describes a method with two procedures for the assessment of carbon black or pigment particle and agglomerate size, and the rating of dispersion in polyolefin pipes, fittings and compounds.
Applicable materials: Polyolefin (HDPE, MDPE, PP) pipes, injection-moulded fittings, and pre-compounded raw pellets. ISO 18553 test, carbon black dispersion test for polyolefin, pigment dispersion assessment, ISO 18553 polyolefin pipe carbon black dispersion testing machine, carbon black agglomerate test HDPE pipe, pigment dispersion rating for PP pipe fittings, polyolefin compound pigment dispersion analysis equipment, carbon black dispersion test method for polyethylene raw pellets
IEC 60811-4-1:2004 specifying five specialized test methods for polyethylene (PE) and polypropylene (PP) compounds used as insulating and sheathing materials in electric and optical fiber cables for power distribution, telecommunications, shipboard, and offshore applications.
Test Methods specific to polyethylene and polypropylene compounds – Resistance to environmental stress cracking – Measurement of the melt flow index – Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) – Assessment of carbon black dispersion in polyethylene using a microscope.
ASTM D5596 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
ASTM D5596 dedicated microscopic carbon black dispersion test exclusively designed for geosynthetic polyolefin products to assess carbon black agglomerate size and dispersion quality.
Applicable materials: Polyolefin geosynthetics (HDPE geomembranes, geonets, geogrids, geocomposites, polyolefin geopipes) with carbon black loading<5 wt%. The material must be continuous solid polyolefin capable of thin microtome slicing. Elastomeric ultra-flexible geosynthetics are permitted with low-temperature pre-stiffening treatment.
Exclusions: Rubber materials, colored pigment-only polyolefins, rigid plastic pressure pipes, non-continuous porous geotextiles that cannot be microtomed.
ISO 11345 Rubber: Assessment of Carbon Black and Carbon Black/Silica Dispersion — Rapid Comparative Methods
ISO 11345 specifies qualitative visual methods for the rapid and comparative assessment of the degree of macrodispersion of carbon black and carbon black/silica in rubber. Ratings are made relative to a set of standard reference photographs, and results are expressed on a numerical scale from 1 to 10. In addition, a method is given for rating the presence of large agglomerates on a numerical scale (ratings 1 to 10).
Target materials: All vulcanized/unvulcanized rubber compounds filled with carbon black (CB), reinforcing carbon black (RCB), semi-reinforcing carbon black (SRCB), or carbon black + silica hybrid fillers. Covers NR, SBR, BR, EPDM, IIR and other common elastomers.
ASTM D3849 Carbon Black Morphological Characterization by Electron Microscopy
Q1. What is ASTM D3849?
ASTM D3849 is an ASTM International test method that characterizes the morphology (size and shape) of carbon black from transmission electron microscope (TEM) images, and certifies mean particle size (MPS) using a correlation with statistical thickness surface area (STSA). The current edition is D3849-22 (published/updated July 2022). It is the only recognized standard method for the digital measurement of carbon black particle-size statistics by TEM.
Q2. What exactly does D3849 measure?
Two levels of carbon black structure:
Primary particle size — the mean diameter of the small, spheroidal, paracrystalline, non-discrete nodules that make up an aggregate (typically ~5–300 nm).
Aggregate size — the size of the discrete, rigid colloidal entity that is the smallest dispersible unit (typically ~50–1000 nm).
From TEM images it derives mean particle size, weight mean particle size, particle-size heterogeneity index, electron microscope surface area (EMSA), mean aggregate size, weight mean aggregate size, and aggregate heterogeneity index.
Q3. What are Method A and Method B?
Method A — Morphological Evaluation (Semi-Quantitative) via TEM: TEM imaging + automated image analysis. Gives particle and aggregate size distributions.
Method B — Mean Particle Size Certification via STSA Correlation: STSA is measured by nitrogen adsorption (ASTM D6556) and converted into a certified maximum MPS. No TEM needed.
Q4. Why does one standard contain two completely different methods?
Because TEM is excellent for seeing carbon black but poor at certifying it. ASTM states that STSA is more precise than TEM-MPS; TEM values can be manipulated through parameter choice (e.g., magnification); STSA correlates better with end-use performance; and TEM number-weighted means are misleading for blends of grades with very different particle sizes. So Method A = characterize/compare; Method B = certify.
Q5. Is D3849 used for routine quality control?
No. The standard says explicitly that D3849 is not used for QC in carbon black manufacturing for logistical and economic reasons, and that TEM-generated values should not be used for specification purposes because of their between-laboratory variability. Its roles are R&D characterization, grade fingerprinting, recovered-carbon-black identification, and MPS certification for plastics weatherability.
Q6. Why is the ASTM D3849 test important for carbon black?
Because particle size distribution is carbon black's single most important property. At a given loading, blackness, rubber reinforcement and UV protection all increase as particle size decreases. Aggregate size and shape ("structure") independently control compound viscosity, dispersion behaviour, and the stiffness/modulus of elastomer systems. If you cannot measure morphology, you cannot explain or predict the performance of a tyre tread, a cable jacket or a pipe compound.
Q7. Why is it important for the rubber industry?
TEM shows the actual particles and aggregates behind the two routine grade metrics — iodine number (surface area) and oil absorption number (structure). It is used to develop tread-grade blacks (N100–N300), to benchmark competitor grades, to check what black is actually present in a compound, and increasingly to qualify recovered carbon black (rCB) from end-of-life tyres.
Q8. Why is it important for the plastics industry?
Certain plastic applications require certified UV (weatherability) performance:
Wire and cable jacketing: MPS ≤ 20 nm → requires STSA ≥ 80 m²/g
Pipe: MPS ≤ 25 nm → requires STSA ≥ 65 m²/g
These two levels are the only MPS levels specified commercially as performance criteria. Passing the MPS/STSA gate is a basic market qualification; the compounder then confirms performance with, for example, ASTM D3349 (absorption coefficient).
Q9. Why is "morphology" not just a property of the powder?
Because carbon black aggregate dimensions and shape depend on the medium in which the sample is dispersed and on the mixing procedure. That is why D3849 prescribes four separate dispersion routes and controls humidity, sonication energy and pyrolysis atmosphere — two labs dispersing the same powder differently will legitimately get different aggregate data.
Q10. What test equipment does ASTM D3849 require?
Transmission electron microscope — point-to-point resolution 1.0 nm or better, recommended 60–120 kV, liquid-nitrogen cooled anti-contamination device ("cold finger"), CCD camera.
Image analysis system — TEM-interfaced camera ≥ 640 × 480 px (modern practice 2K × 2K), frame grabber, software for background/noise elimination, thresholding, edge smoothing, and area/perimeter measurement.
Sample preparation equipment — ultrasonic bath or ultrasonic probe, two-roll mill (for CAB chips), vacuum evaporator with a-c glow discharge (for carbon-coated grids), tube furnace (800–900 °C, inert) and/or pyroprobe (150–1000 °C), dry box ≤ 30 % RH, analytical balance (±0.5 mg), high-speed centrifuge (15 000–20 000 r/min).
Consumables — 3 mm carbon-coated EM grids (200–300 mesh), carbon rods, Pasteur pipets, glass vials, filter paper, lens tissue, porcelain boats.
For Method B — a nitrogen adsorption surface-area analyzer operated per ASTM D6556.
Q11. What does the test specimen look like?
A 3 mm, 200–300 mesh EM grid carrying a thin evaporated carbon film on a poly(vinyl formal) backing. One drop of diluted carbon black dispersion is placed film-side up near the grid centre from ~12 mm height and dried ~1 min on filter paper. Preparation must be done in a dry box if room RH > 30 % (or under UHP nitrogen purge if RH > 35 %).
Q12. What sample types can be analysed?
Dry (as-manufactured) carbon black — ultrasonic bath route (8–10 mg in 1 cm³ chloroform/THF, 3–5 min) or ultrasonic probe route (5–10 mg in 20 cm³, 40–50 W for 10 min in an ice bath).
Carbon black removed from a vulcanized rubber compound — ~1 mm³ sections pyrolyzed above the polymer decomposition temperature under inert gas.
CAB (cellulose acetate butyrate) chip dispersion — high-shear mixing on a two-roll mill (front roll 76 °C, rear roll 66 °C, gap 0.2 mm, 20 r/min, 20 min total flux time).
Q13. How many aggregates must be measured?
About 2000 aggregates per sample, from adjoining fields tracked in a straight line across a grid opening. A standard carbon black of similar particle size is re-measured at the same magnification as a system check.
Q14. What is EMSA?
EMSA (electron microscope surface area) = 6000 / (ρ · d_sm), with ρ = 1.8 g/cm³ and d_sm the surface-mean particle diameter. It is the surface area calculated from TEM data, and a useful sanity check: D3849 suggests choosing a magnification at which EMSA is similar to the STSA value measured by D6556.
Q15. What magnification/resolution should be used?
Selected so the field of view exceeds the largest aggregate while still resolving primary particles and distinguishing small aggregates from noise. D3849 gives this guideline (for ≥2K × 2K cameras):
Particle size range | Resolution |
|---|---|
14–21 nm | 1.5–2.0 nm/px |
22–26 nm | 2.0–2.5 nm/px |
27–37 nm | 2.5–3.0 nm/px |
38–49 nm | 3.0–4.0 nm/px |
50–62 nm | 4.0–5.0 nm/px |
63–100 nm | 5.0–6.0 nm/px |
101–199 nm | 6.0–12.0 nm/px |
200–400 nm | 12.0–20.0 nm/px |
Resolution is verified with a 2160 lines/mm calibration grating at the eucentric stage centre, and the magnification factor is recorded in nm/pixel. The guideline does not cover multi-modal primary particle sizes.
Q16. Is there an ISO equivalent to ASTM D3849?
There is no direct ISO counterpart for TEM-based carbon black morphology. Related documents are ISO 4652 / ISO 18852 (nitrogen-adsorption surface area, the ISO analogues of D6556 and hence of Method B), ISO 13322-1/-2 (generic particle sizing by static/dynamic image analysis), ISO 9276-1/-2/-5 (representation and moment-based calculation of particle size results), ISO 19749 (nanoparticle size/shape distributions from electron microscope images), and ISO/TS 21361 (TEM/EDS identification of airborne carbon black). In China the GB/T 3780 series mirrors the ASTM D24 family; note that GB/T 3780.17 determines particle size indirectly by reflectance, in contrast to D3849's direct TEM method.
Q17. How does D3849 differ from carbon black dispersion tests such as ISO 11345 and ISO 18553?
Different question, different scale. ISO 11345 and ISO 18553 assess macro-dispersion — how uniformly carbon black is distributed in a rubber compound or polyolefin pipe material — by optical/CCD imaging and a 1–10 rating. D3849 measures the nanoscale morphology of the carbon black itself (primary particle and aggregate size) by TEM. Dispersion tests are fast factory QC tools; D3849 is a laboratory characterization and certification method.
Require More Customized Solutions?