Information on the most widely used ASTM standards within the materials testing industry
Model: XJL-300, ISO 3127, ASTM D2444, UL 651, DIN-EN 744, BS-EN 1411
The XJL-300 Falling Hammer Impact Tester evaluates the resistance of thermoplastic pipes, fittings, sheets, and configured PVC profiles to external impact. The system provides preset drop-height control, automatic hammer lifting and release, anti-secondary-impact protection, digital height display, and automatic zeroing. (Standard: ISO 3127, ASTM D2444, DIN-EN 744, BS-EN 1411)
Automatic falling hammer impact tester adopt micro processor control, avoid secondary impact, can preset impact height, automatically hang the hammer, automatically lift hammer to set height position etc.,
In addition to pipe testing according to ISO 3127 and ASTM D2444, the machine can be configured as impact test equipment for PVC profiles by selecting the appropriate specimen support, impactor, drop mass, and conditioning equipment for the required test method.
General Introduction
With a suitable profile support and impactor configuration, the XJL-300 can be used as a PVC profile impact tester for rigid PVC and PVC-U building profiles, including window profiles, door profiles, siding components, and other extruded sections.
The falling mass applies a controlled impact to the specimen so laboratories and profile manufacturers can identify cracking, splitting, brittle fracture, or complete breakage. Depending on the selected configuration and test procedure, the equipment can support:
· ASTM D4495 impact testing of rigid PVC profiles
· EN 477 falling mass testing of PVC-U profiles
· Quality control of extruded window and door profiles
· Evaluation of formulation and processing changes
· Comparison of impact resistance between production batches
For EN 477 testing, the required low-temperature conditioning equipment and standard-specific profile support should be selected with the machine.
Standard: ISO 3127, ASTM D2444, DIN-EN 744, BS-EN 1411
Key features:
1, Automatic falling hammer impact tester adopt micro processor control, avoid secondary impact, can preset impact height, automatically hang the hammer, automatically lift hammer to set height position etc.,
2, Conforms to ISO 3127, ASTM D2444, DIN-EN 744, BS-EN 1411.
3, Equipped with digital display meter to indicate the real time test result like impact height etc.

Replace the Existing Building Application Bullet
PVC Profile and Building Products: Falling weight impact testing of rigid PVC and PVC-U window profiles, door profiles, siding sections, plastic building profiles, sheets, and related components using matched supports and impactors.
What is a Falling Hammer Impact Tester?
Falling Hammer Impact Tester (also known as drop weight impact tester, falling weight impact testing machine) is a professional material testing equipment designed to evaluate the impact resistance, toughness, and anti-blow performance of non-metallic materials, especially thermoplastic pipes, plastic sheets, and polymer fittings under free-fall impact load. It simulates real-world external blow and collision conditions to detect material brittleness, crack resistance, and structural durability, providing accurate mechanical performance data for material quality inspection, product R&D, and factory batch testing.
As a professional falling hammer impact tester manufacturer, UnitedTest independently develops and produces full-series drop impact test machines that fully comply with global mainstream testing standards including ISO 3127 and ASTM D2444. Our equipment supports customized impact energy, drop height, and fixture configurations to meet diverse industrial testing requirements.
Features
1, Automatic falling hammer impact tester adopt micro processor control, avoid secondary impact, can preset impact height, automatically hang the hammer, automatically lift hammer to set height position etc.,
2, Conforms to ISO 3127, ASTM D2444, DIN-EN 744, BS-EN 1411.
3, Equipped with digital display meter to indicate the real time test result like impact height etc.
4. Automatic personal safeguards are provided, including specimen door, anti-shock and striker window. safeguard etc. It confirms to 89/392/EEC.
5. Impact height can be set between 50mm and 2000mm at random, with anti-rebound device.
6. Imported servo motor ensures high lifting speed and enhances test efficiency.
7. Combined impact striker, user can adjust the mass of striker by extra weight.
8. Combined V block is suitable for pipes with various diameters and sheet plates with different thickness.
9. Unique design for falling tube with air-bleed hole ensures the energy loss within 2%.
ISO 3127 Thermoplastics pipes – Determination of resistance to external blows – Round-the-clock method is the global standard for impact testing of circular thermoplastic pipes. It specifies the round-the-clock multi-point impact test method, requiring uniform impact detection around the pipe circumference to comprehensively verify the overall anti-blow performance of plastic pipes. This standard is mainly applicable to PVC-U, PE, MPP, and other plastic water supply and power pipes, excluding pipe fittings.
ASTM D2444-21 Standard Practice for Impact Resistance of Thermoplastic Pipe and Fittings by Falling Weight (Tup) is the North American mainstream testing standard. It adopts a single-point vertical diameter impact method with random angular orientation for pipe specimens, covering both thermoplastic pipes and matching pipe fittings. It is widely used for quality inspection of plastic pipeline products exported to North America.
Step 1: Specimen Preparation – Cut standard thermoplastic pipe/fitting specimens according to standard requirements, remove surface burrs, and place them in a constant temperature environment for conditioning to eliminate temperature interference.
Step 2: Fixture Installation – Install matching fixture: adopt rotating circumferential fixture for ISO 3127 round-the-clock test; adopt vertical single-point fixed support fixture for ASTM D2444 pipe and fitting test.
Step 3: Parameter Setting – Set test drop height, hammer weight, impact times and test angle according to standard requirements to determine fixed impact energy.
Step 4: Automatic Impact Test – The system automatically lifts the hammer to the set height and releases it freely to impact the specimen. ISO 3127 test requires rotating the pipe at a fixed angle for multi-point circumferential impact; ASTM D2444 adopts single-point random angle impact.
Step 5: Result Judgment & Recording – Observe specimen surface for cracks, fractures, peeling or damage, record failure quantity and calculate impact failure rate to evaluate material impact resistance grade.
UnitedTest ISO 3127 ASTM D2444 drop weight impact tester is widely used in quality control, product certification and material R&D of multiple industries, with core application scenarios as follows:
- Plastic Pipeline Industry: Impact resistance test of PVC-U water supply pipes, PE drainage pipes, MPP power cable pipes, double-wall corrugated pipes, steel belt reinforced pipes and pipe fittings.
- Polymer Material Manufacturing: Toughness and anti-impact performance detection of plastic sheets, acrylic plates, composite non-metallic materials.
- Building & Construction Industry: Quality inspection of plastic building profiles, drainage pipeline systems, and building plastic accessories.
- Electric Power & Communication Industry: Safety performance test of power protection pipes and communication cable casing pipes to verify anti-collision and anti-damage ability during construction and operation.
- Third-party Testing Institutions & Laboratories: Standardized certification tests for plastic products, providing authoritative test reports for product market access and export certification.
Falling hammer impact tester, drop weight impact tester, plastic pipe impact tester, ISO 3127 falling hammer impact tester, ASTM D2444 drop weight impact testing machine, thermoplastic pipe impact resistance tester, plastic pipe external blow test machine, UnitedTest impact testing equipment, pipe fitting drop impact tester
Main parameters
| Model | XJL-300 |
| Hammer weight | 0.250—16.000kg (0.125 increment) |
| Working bench stroke | 0—400mm (630mm) |
| Specimen diameter | φ10—φ400mm (more big is available) |
| Radius of hammer head | D25, D90 |
| Impact height | 2000mm |
| Height position error | ±2mm |
| Power | 220V, 50HZ |
| Display type | Digital display |
| Dimensions | 700mm×700mm×3300mm |
| Weight | 450Kg |
| Standard Accessories | Loadframe, Electronic control box, hammer block, power cord, manual etc. |
Main accessories
Loadframe,
Dart head,
weight unit,
tools,
power cord,
manual etc.
Standard
ISO 3127 Thermoplastics pipes -- Determination of resistance to external blows -- Round-the-clock method
ISO 3127 specifies a method for the determination of the resistance to external blows of thermoplastics pipes of circular cross-section; it is called the round-the-clock method. It applied in the plastics piping industry, particularly for manufacturers and quality control laboratories dealing with fluid transport systems (e.g., water supply, drainage, gas pipelines). It is used for testing isolated batches of pipes as well as monitoring continuous production runs.
Test pieces are subjected to blows from a falling striker, of specified mass and shape, dropped from a known height onto specified positions around the circumference of the test piece. The true impact rate of the batch, or production run from an extruder, is estimated.
Commonly the impact height 2000mm, impact hammer 6.3kg, 9.1kg, 13.6kg.
ASTM D2444 test method covers the determination of the impact resistance of thermoplastic pipe and fittings under specified conditions of impact by means of a tup (falling weight). This method is applicable to isolated batches of pipe tested at 0 °C (information is also given for sampling from the continuous production of pipe).
EN 1411 specifies a standardized laboratory procedure to evaluate the impact toughness of thermoplastic pipes. Unlike pass/fail tests, this method statistically determines the H₅₀ value—the estimated height of fall that causes a 50% failure rate in a batch of pipes.
EN 744 specifying the round-the-clock falling-weight impact method to evaluate the resistance to external blows of circular cross-section thermoplastics pipes. It's a standardized procedure to determine the ability of thermoplastic pipes to withstand external impacts without failing.
ASTMD5628 specifies a falling‑dart/tup method to measure the threshold impact‑failure energy for flat rigid plastics. It uses the Bruceton Staircase (Up‑and‑Down) Method to determine the energy causing 50% of specimens to fail (mean‑failure energy, MFE).
ISO 6603-1 specifies falling-dart methods to measure the puncture‑impact performance of rigid plastics using only the 50% impact‑failure energy (E₅₀) threshold, without recording force–time or force–deflection curves.
ASTM D4226 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
ASTM D4226 covers determination of the energy required to crack or break rigid poly(vinyl chloride) (PVC) plastic sheeting, profile flat sections used in building products, and extruded/molded test samples, under a free-falling standard weight striking an impactor in contact with the specimen.
Also known as the Gardner falling-weight impact test for rigid flat plastic panels. It quantifies the impact energy required to crack, puncture, shatter, or tear rigid PVC sheets, extruded profiles, and molded flat coupons via a free-falling standardized weight striking a defined impactor tip. It uniquely distinguishes ductile failure (plastic tearing, stretching) and brittle failure (sharp cracking, shattering) to characterize the ductile-to-brittle transition of PVC building plastics.
ASTM E2486 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
ASTM E2486 evaluates how an EIFS laminate responds to rapid, localized deformation caused by a falling weight, and then assigns the system to a standardized impact-resistance class. It uses a drop‑weight impact setup to produce rapid deformation on EIFS specimens and judges performance based on visible breakage of reinforcing mesh under normal lighting.
ASTM D4495 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D4495 defines a falling‑weight impact test exclusively for extruded rigid poly(vinyl chloride) (PVC) building profiles (window‑door frames, siding components). It determines the mean‑failure height and mean‑failure energy that cause brittle fracture of hollow structural PVC profiles, adopting the up‑and‑down (Bruceton) statistical staircase method to characterize profile toughness for quality control, product‑standard formulation, and material‑processing change evaluation. Test outcomes distinguish brittle failure (sharp crack, split/shatter, part separation) versus ductile non‑failure (tear, hinged break without full penetration).
EN 477 Plastics‑Poly(vinyl chloride) (PVC)‑based profiles‑Determination of the resistance to impact of profiles by falling mass
EN 477 specifies a drop‑weight impact test for rigid unplasticized PVC‑U profiles, primarily performed at −10 °C, and can also apply for other defined test temperatures for PVC‑based profiles.
Full guide for EN 12608‑1 European standard for non‑coated light‑coloured PVC‑U window and door profiles. Learn classifications, test stipulations, specimen info, referenced standards, industry application, and why this norm matters for UPVC building profiles. UnitedTest supplies full‑range EN 12608‑1 compliant PVC‑U profile testing machines for labs & profile manufacturers.
ASTM D2241 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D2241 governs SDR‑series PVC pressure pipes for pressurized water and chemically‑compatible pressurized liquids. The mechanical performance test include sustained pressure, burst pressure, flattening, extrusion quality and impact, plus marking rules.
Frequently Asked Questions
Frequently Asked Questions (FAQ)
Q2: Can UnitedTest’s machine test both plastic pipes and plastic sheets?
Q3: What is the maximum test pipe diameter and impact energy of your equipment?
Q4: Is the test data of your machine internationally recognized?
Q5: Do you provide customized fixtures and after-sales service?
Q6: Why choose UnitedTest falling hammer impact testing machine?
Standards-ready configuration — drop mass, striker/impactor, support plate and fixtures matched to ASTM D4495, D4226, D5420, D5628, D1709, ISO 7765-1, ISO 6603-1, D2444, EN 744 / EN 1411, ISO 3127.
Free-fall you can trust — precision guide tube, verticality verified with plumb bob / spirit level, low-friction reproducible release; no vacuum drag, no chatter.
Repeatable height setting — 50 mm incremental steps with clear scale or digital readout over the full 600 mm – 3 m range.
Rigid, anchored test base — 200 × 300 × 25 mm steel plate and anti-slip slotted brackets keep whole profiles in the most stable position.
Automatic staircase calculation — software drives the up-and-down sequence, plots X/O results, and computes mean failure height, MFE and estimated standard deviation per the ASTM formulas.
Operator safety — optional interlocked protective barrier against flying fragments.
Optional low-temperature package — conditioning chamber / cold box for testing at service temperature, where PVC brittleness actually shows up.
Global delivery & support — export wooden-case packing, 12-month warranty, lifelong technical support, and multi-language software (English standard; Russian and others on request).
Q7: Can the XJL-300 test PVC window and door profiles as well as plastic pipes?
Yes. The machine can test PVC profiles when equipped with the appropriate flat or profile support, impactor, drop mass, and optional low-temperature conditioning system. Please provide the profile dimensions, material, required standard, conditioning temperature, and target impact energy so UnitedTest can recommend the correct configuration.
Q8: Which standards are commonly used for PVC profile impact testing?
ASTM D4495 is used for falling-weight impact testing of rigid PVC profiles. EN 477 specifies falling-mass impact testing for PVC-based profiles, particularly PVC-U profiles tested under defined temperature conditions. These methods require different specimen preparation and configuration from ISO 3127 pipe testing.
Require More Customized Solutions?