DIN EN 744 Impact Test Plastic/PVC pipe and ducting system falling / drop hammer weight impact testing machine. 

It is used to determine the energy required to break or rupture test specimens such as pipe, sheet, laminates, composites, ceramics, and nonferrous metals for material and component evaluation to international testing methods such as ISO6603, ISO3127, ASTMD2444, and UL 651 to name a few.

Round the Clock Method – Lengths of pipe from a batch or production run are subjected to blows from a known mass that falls from a specified height as per test standards ISO3127 & EN744.

Staircase Method – Lengths of pipe are subjected to blows from a known mass and shape but is dropped from differing heights depending on the results of each blow as per test standard EN1411.

DIN EN 744 Plastic pipe PVC Conduit falling weight impact testing machine

1, Automatic falling hammer impact tester adopt micro processor control, avoid secondary impact, can preset impact height, automatically hang the hammer, automatically lift hammer to set height position etc.,

2, Conforms to ISO 3127, ASTM D2444, UL-651, DIN-EN 744, BS-EN 1411.

3, Equipped with digital display meter to indicate the real time test result like impact height etc.

4. Automatic personal safeguards are provided, including specimen door, anti-shock and striker window. safeguard etc. It confirms to 89/392/EEC.

5. Impact height can be set between 50mm and 2000mm at random, with anti-rebound device.

6. Imported servo motor ensures high lifting speed and enhances test efficiency.

7. Combined impact striker, user can adjust the mass of striker by extra weight.

8. Combined V block is suitable for pipes with various diameters and sheet plates with different thickness.

9. Unique design for falling tube with air-bleed hole ensures the energy loss within 2%.