Information on the most widely used ASTM standards within the materials testing industry
ASTM D6225 Standard Test Method for Granule Cover of Mineral-Surfaced Roofing
ASTM D6225 is a visual, area-estimation test used to measure how completely mineral granules cover the asphaltic coating on mineral-surfaced roofing. In practice, it is most often used after an abrasion test to determine how much asphaltic compound has become exposed because granules were dislodged. UnitedTest supports this workflow with ASTM D6225-compatible inspection systems designed for repeatable visual areal analysis of roofing shingles and bituminous sheets.
Test Principle
The test determines the granule hiding power or percentage of exposed asphaltic coating on a roofing sample.
Principle:
A magnified view of the roofing surface is compared against a calibrated transparent grid. The operator counts the grid squares in which asphalt is visibly exposed. The result is expressed as a percentage of the evaluated area.
It does not measure granule weight loss directly; instead, it measures the areal consequence of granule displacement—how much asphalt is left unprotected.
Test Specimen Details
Minimum three replicate specimens, each cut to size 51 mm × 229 mm (2 in × 9 in) or larger
Specimens can be pre‑abraded samples from ASTM D4977/D4977M abrasion testing.
Test Equipment required for ASTM D6225 Granule Cover Test for Mineral Surfaced Roofing
| Granule Adhesion Abrasion Tester | Reciprocating cycle count: 50 full bidirectional cycles (50 forward + 50 backward strokes), completed within 60–70 seconds total test duration Vertical downward load from brush assembly: 2268 ±7 g (5 lb ±4 oz) Horizontal stroke length: 152 ±6 mm (6 ± 1/4 in) Brush orientation: Brush’s 38.1 mm side runs parallel to the reciprocating stroke axis |
| Tools |
|
Test Parameters
Evaluated test area: fixed 32 mm × 159 mm (1.25 in × 6.25 in) abraded zone (2160 grid squares total).
Counting threshold: count a grid square when one‑half or more of square area shows exposed asphaltic coating
Step-by-Step Test Procedures of ASTM D6225 Granule Cover Test for Mineral Surfaced Roofing
Specimen handling: Prepare ≥3 specimens of 51 mm × 229 mm minimum dimension, prevent granule cross‑contamination.
Apparatus setup: Lay specimen flat; position light source and 8× magnifier for clear visual access to sample surface. Abrasion‑tray fixtures may hold the specimen directly for inspection.
Remove loose granules by gentle tapping on each specimen.
Align transparent grid overlay: match the 32 mm × 159 mm grid area exactly with the target abraded/exposed zone. Use marker‑scribed reference lines if the sample comes from abrasion testing per D4977/D4977M.
Secure overlay grid firmly onto sample surface using tray clamps or push‑pin/cork support substrate to eliminate movement during counting.
Under magnified view, count all squares where ≥ half‑square area contains exposed asphaltic compound, record number A for each specimen.
Calculate percentage exposed asphalt for each replicate with given formula; compute arithmetic average value across all specimens for one sample batch.
Industry / Application Fields
Applied for mineral‑granule surfaced asphalt roofing shingles and bituminous roofing sheets.
Evaluate granule coverage for original “as‑manufactured” products, or materials after artificial abrasion, outdoor weathering and environmental exposure.
Used for product specification compliance verification and comparative performance ranking among different roofing material formulations.
Related Test Standard
| EN 12039 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules |
| ASTM D4977 | Standard Test Method for Granule Adhesion to Mineral-Surfaced Roofing by Abrasion |
| GB/T 328.17 | Test methods for building sheets for waterproofing - Part 17: Bitumen sheets for waterproofing-adhesion of granules |
| ASTM D6225 | Standard Test Method for Granule Cover of Mineral‑Surfaced Roofing – determines the hiding power of granules after an abrasion test (often used together with D4977 to assess exposed asphalt area). |
Importance of this Test for Roofing Material
Mineral granules serve critical protective functions for asphalt roofing sheets:
1. Granules shield the underlying asphaltic binder from ultraviolet solar radiation, slowing photo‑oxidation ageing and material degradation. High asphalt‑exposed percentage means weakened UV‑resistance service life.
2. Granule layer improves weather resistance, water‑run‑off performance and surface durability against wind‑driven rain and particle erosion.
3. This test quantifies how much protective granule surface is lost after abrasion or ageing. It reflects real‑world service risk: higher exposed asphalt area correlates with higher risk of premature cracking, hardening and early roof‑system failure.
4. Manufacturers and third‑party laboratories rely on D6225 results to qualify new roofing formulations, compare granule‑adhesion quality and check if finished goods meet industry specification thresholds before market release
Keywords: ASTM D6225 test equipment, ASTM D4977 granule adhesion tester, mineral‑surfaced roofing testing machine, bituminous roofing shingle granule loss test, granule cover test apparatus for asphalt roofing, roofing material lab testing instrument, ASTM D6225 test kit, ASTM D4977 granule adhesion tester, mineral‑surfaced roofing test machine, asphalt shingle granule cover test, bituminous roofing membrane granule loss testing instrument, roofing ASTM D08 standard testing equipment
Related products and device
Related Standard
EN 12039 Flexible sheets for waterproofing‑Bitumen sheets for roof waterproofing‑Determination of adhesion of granules
EN 12039 defines a brushing‑abrasion test to quantify how firmly mineral granules adhere onto factory‑produced bituminous roofing waterproofing sheets. Granule Adhesion Brushing Tester
ASTM D4977 Standard Test Method for Granule Adhesion to Mineral-Surfaced Roofing by Abrasion
ASTM D4977 provides a quantitative laboratory method for measuring how firmly the mineral granules are bonded to the coating asphalt in mineral‑surfaced roofing products. Exclusively for factory-fresh (“as manufactured”) unweathered roofing specimens.
ASTM D6225 Test Frequently Asked Questions (FAQs)
Q1: What is ASTM D6225 test used for?
A1: ASTM D6225 quantitatively measures asphalt exposure percentage on mineral‑granule surfaced roofing sheets. It assesses granule hiding/covering performance, most commonly after completing ASTM D4977 abrasion test. It can also evaluate specimens after natural weathering or other environmental exposure, for compliance check or side‑by‑side material comparison.
Q2: Why is ASTM D6225 important for mineral‑surfaced roofing materials?
A2: Mineral granules form the critical protective outer layer for bituminous roofing. When granules are lost, underlying asphalt binder gets exposed to UV sunlight, rain, wind‑borne particles. Higher percentage of exposed asphalt accelerates photo‑oxidation, brittleness, cracking and premature roof failure. This test gives objective numerical data to judge granule retention quality, support R&D formulation optimization, factory QC and specification compliance verification for asphalt shingles & modified‑bitumen cap sheets.
Q3: What standard is paired / closely related to ASTM D6225? What is their relationship?
A3: ASTM D4977/D4977M (Granule Adhesion by Abrasion) is its direct companion standard.
ASTM D4977 performs mechanical brush abrasion to knock loose surface granules, measuring total mass of lost granules (gram weight).
ASTM D6225 is follow‑up inspection on those abraded samples, measuring how much base asphalt coating becomes exposed (area percentage).
Note: Granule weight loss (D4977) does not directly equal asphalt exposed area (D6225); the two deliver different performance indicators and are often run as a combined test sequence.
Q4: What apparatus are mandatory to run full ASTM D6225 test?
A4: Required hardware:
8× fixed‑magnification magnifier, minimum working view area 806 mm² (1.25 in²)
Standard transparent grid overlay: 32 × 159 mm test zone, total of 2160 small squares (each square side 1.27 mm /0.05 in)
High‑intensity lamp or fluorescent ring light for adequate surface illumination
Auxiliary: specimen flat support, push‑pins or clamping tray, felt‑tip marker for abrasion‑zone alignment marking.
Q5: How many test specimens are required for ASTM D6225? What specimen size?
A5: Minimum 3 replicate specimens. Each specimen shall be cut to 51 mm × 229 mm (2 in ×9 in) or larger. Specimens can be the exact samples after ASTM D4977 abrasion test. Operators must prevent loose granules transferring cross‑specimens during handling.
Q6: What is the counting rule for grid squares in ASTM D6225?
A6: Count one grid square only if ≥50 % (one‑half or more) of that square area shows exposed asphaltic coating. Squares with less‑than‑half asphalt exposure are not counted. Total valid grid squares for calculation = fixed value of 2160 squares for 32 × 159 mm abraded zone.
Q7: How do I calculate final exposed asphalt percentage and report results?
A7: Formula: % exposed asphalt = (A / B) ×100Where A = counted exposed squares; B = total 2160 grid squares.
Compute average value across 3 specimens, report final average result rounded to nearest 0.1 %. Report must note root cause for granule displacement: abrasion‑test damage or weathering exposure.
Q8: What common mistakes cause unreliable D6225 test results?
A8:
Mis‑align overlay grid against actual abraded test area → wrong counting region.
Grid overlay shifts/moves while counting; overlay must be secured firmly.
Counting squares with less‑than‑half asphalt exposure against standard rule.
Forgetting gently tap off loose granules before inspection.
Poor lighting makes it hard to distinguish exposed asphalt vs residual granules.
Copy printed grid overlay with changed dimensions; copied transparency must match original grid size exactly.
Granule cross‑contamination when handling multiple specimens.
Require More Customized Solutions?