- Universal testing machine
- Fixtures
- Biomedical device/equipment
- Vehicles (car, motorcycle)
- Compression/Flexural test
- Hardness tester
- Impact testing machine
- Torsion testing machine
- Abrasion & wear tester
- Plastic & Pipe testing
- Tensiometer / Goniometer
- Erichsen cupping tester
- Other Testing Equipment
- Grinding & polishing machine
- Introduction
- Specification
- Accessories
- Standard
- LEAFLET & VIDEO
- Contact Us
NJS-10X series Metal Wire Torsion Tester is used to execute metal wire torsion test, measure the metal wire endure of plastic distortion ability in single or double direction torsion condition; check the surface or internal defect. ISO 7800 Metallic materials -- Wire -- Simple torsion test; ISO 9649 Metallic materials -- Wire -- Reverse torsion test; ASTM A938 Standard Test Method for Torsion Testing of Wire; GB/T 239
Main Application:
Steel: steel wire, steel rod, steel rebar;
Copper: copper wire, copper rod, copper alloy
Aluminum: Aluminum wire, aluminum rod, aluminum alloy;
Other metal: Rod, glass steel, alloy steel etc.
Principle:
A test piece of wire is twisted a specified number of turns through 360° around its own axis in one direction, and then a specified number of turns through 360° in the opposite direction.
Model | NJS-1X | NJS-3X | NJS-10X | NJS-30X | |
Metal wire diameter | 0.3-1mm | 1-3mm | 3-10mm | 10-30mm | |
Movable guide rail parallelism | <0.2 | ||||
Two clamper distance | 300mm | 500mm | |||
Torsion speed | 180, 300±10% rpm | 60, 120±10% Rpm | 30, 60±10% Rpm | ||
Working noise | <70dB | ||||
Jaw hardness | 55~65 | ||||
Power supply | 50Hz, 380V |
Frame,
Motor
LCD controller
Chuck
Power cord
Manual
ISO 7800 Metallic materials -- Wire -- Simple torsion test
ISO 9649 Metallic materials -- Wire -- Reverse torsion test.
ASTM A938 Standard Test Method for Torsion Testing of Wire
GB/T 239.1, GB/T 239.2 Metallic materials -- Wire – torsion test.
This Standard specifies a method for determining the ability of metallic wire of diameter dimension from 0,3 mm to 10,0 mm inclusive to undergo plastic deformation during reverse torsion. This test is used to detect surface defects, as well as to assess ductility.