Your current locationHome > Products > Environmental chamber
Products
Salt Spray Chamber

SAM-Y series Salt spray tester is one kind of artifical environmental testing equipment, it produces a corroding environment in the chamber and thus, parts in it are attacked under this severe corroding atmosphere. It's an important apparatus to check the certain parts suitability and reliability, commonly used in mechanical, national defense, light industry, electronic, instruments etc.  This tester can be used to execute solution as NSS (Neutral Salt Spray), as well as ASS (Acetic acid Salt Spray).

Features:

This tester conform with CNS, ASTM B117, JIS and ISO 9227 etc. standard, used to test the corrosion resistance performance of different material after protective finish like coating, electroplate, anti-rust oil.
Spray mode: A: Continuous salt spray; B: Controllable salt spray.

1, Mainly consist of tank, pneumatic system, heating unit and control system;
2, Tank adopt imported anti-erode, anti high temperature, aging resistance PVC plate, molding and high temperature welding joint, easy clean and no leakage;
3, Upper cover use transparent glass steel, convenient for operate to observe the sample and spray situation;
4, The junction of tank and cover adopt water sealing structure, easy to close and open the cover without salt fog overflow;
5, Several layers racket in the tank, to realize sample putting at various direction;
6, Tower type spray system, to make fog spray and falling uniform, avoid salt fog crystal;
7, Independent heating system to ensure the heating effective;
8, Temperature control adopt RKC temperature controller, with PID function, high accuracy and long working life;
9, Wire control panel and other component all located at right side of tank, with lock door can easy inspect and maintain.

Model SAM-Y60 SAM-Y90 SAM-Y110 SAM-Y130
Inner dimensions(D*W*H) mm 450*600*400 600*900*500 750*1100*500 850*1300*500
Outer dimensions(D*W*H) mm 580*1140*1000 770*1440*1250 920*1640*1450 1090*1960*1600
Working Chamber volume 108L 270L 412L 624L
Temperature range 35℃~55℃
Temperature fluctuation less than 0.5℃
Temperature uniformity less than 2℃
Salt spray settling amount 1-2ml/80cm2.h
Time 1-999.9 (S,M,H)
Fog spray mode Consequent, tower spray system, quartz glass nozzle
Temperature sensor Anti-corrosion platnum resistance
Controller Japan “RKC” brand
Safety Voltage, current, over heating, lack water etc.
Power AC220V 1PH 50HZ AC380V 3PH 50HZ
Salt sprat tester mainframe
Humidity indicator
Collector
Glass nozzle 
Humidity cup
Glass filter
Spray tower
Supporter
Operation manual
ISO 9227: Corrosion tests in artificial atmospheres -- Salt spray tests

ASTM B117: Standard Practice for Operating Salt Spray (Fog) Apparatus
Your email address
Your message

contact
Email:
export@unitedtest.com
unitedtest@hotmail.com
Tel:
+86-10-57055071
+86-13911165373
SKYPE:unitedtest08
WhatsApp:
+86 13911165373
X