Your current locationHome > Products > Abrasion & wear tester
Products
MMW-1A Vertical Universal Friction & Wear Test Machine

MMW-1A Vertical Universal Friction Wear Test Machine is similar to an the FALEX MultiSpecimen Test machine in main application and functions, it’s widely used as imitation inspection testing machine in design and develop hydraulic oil, combustion engine oil, gear oil etc..

Perhaps the most versatile commercial system for evaluating friction, wear, and abrasion characteristics of materials, coatings, and lubricants. Numerous Standard Test Methods and Application Specific Custom testing programs are possible due to user selected contact geometries, motions, velocities, temperatures, contact pressures, and test specimen materials allow one test apparatus to meet many test specifications and simulate a broad range of field applications.

Applications include research and development, quality control, product qualification and the evaluation of physical and performance characteristics of materials, coatings, and lubricants. Test studies and a number of technical publications confirm exceptional correlation with field service.

\        \
Four ball friction pair                  Pin-Disc friction pair

Other friction pair like:
Ball-plate friction pair (one ball and three ball);
Bronze ball three pieces of friction pair;
Rolling contact fatigue four-ball friction pair;
Stick-slip friction pair.
Model MMW-1A
1  Test Force  
1.1 Axial load range 10N-1000N
1.2 Load accuracy ±1%
1.3 Load zero point sensitivity ±1.5N
1.4 Loading rate 400N/min
1.5 Load holding accuracy ±1%
2  Friction Moment  
2.1 Max. Friction moment 2.5N.m
2.2 Friction moment accuracy ±2%
2.3 Friction sensor 50N
2.4 Friction arm of force distance 50mm
3  Spindle stepless speed change  
3.1 Stepless variable speed system 5-2000r/min
3.2 Main spindle RPM accuracy ±1%
4  Test Medium Oil, Water, Slurry, Abrasive, etc.
5  Heating system  
5.1 Heater working range Ambient temp. to 260℃
5.2 Disc Type Heating Plate φ65, 220V, 250W
5.3 Jacket Heater φ68×44,220V,300W
5.4 φ3 twin output platinum thermal resistance RO=100±0.1Ω(Long, short each one set)
5.5 Temperature control accuracy ±(0.3+0.005t)℃
6. Taper of spindle 1:7
7. Max.distance between spindle and lower disc >75mm
8. Spindle control 1, Manual control; 2, Time control ;
3, Revolution Control; 4, Friction moment control
9. Time display & control range 10s~9999min
10. Revolution display & control range (1~99)×105
11. Output maximum moment of main motor 5N.m
Dimensions 860*740*1560mm
Weight 650Kg
Item Quantity
Frame 1 set
Computer 1 set
Printer 1 set
Thrust ring end face friction test pair 1 set
Pin-disc friction test pair 1 set
Four ball friction test pair 1 set
Ball disc friction test pair 1 set
Heater 1 set
Microscope 1 set
Professional measuring software in English 1 set
Documents (Manual, packing list, certificate)
 
ASTM G99 "Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus”

ASTM D2266 "Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four Ball Method) “

ASTM D4172 “Standard Test Method for Wear Preventive Characteristics of Lubricating Fluids (Four Ball Method)”

ASTM D3702 “Standard Test for Wear Rate and Coefficient of Friction in Self-Lubricated Rubbing Contact Using a Thrust washer Testing Machine”
Your email address
Your message

contact
Email:
export@unitedtest.com
unitedtest@hotmail.com
Tel:
+86-10-57055071
+86-13911165373
SKYPE:unitedtest08
WhatsApp:
+86 13911165373
X