Your current locationHome > Products > Torsion testing machine
Products
Digital Display Manual Torsion Tester

Torsion tests twist a material or test component to a specified degree, with a specified force, or until the material fails in torsion. The twisting force of a torsion test is applied to the test sample by anchoring one end so that it cannot move or rotate and applying a moment to the other end so that the sample is rotated about its axis. The rotating moment may also be applied to both ends of the sample but the ends must be rotated in opposite directions. The forces and mechanics found in this test are similar to those found in a piece of string that has one end held in a hand and the other end twisted by the other.
 
Purpose of torsion testing:
 
The purpose of a torsion test is to determine the behavior a material or test sample exhibits when twisted or under torsional forces as a result of applied moments that cause shear stress about the axis. Measurable values include: the modulus of elasticity in shear, yield shear strength, torsional fatigue life, ductility, ultimate shear strength, and modulus of rupture in shear. These values are similar but not the same as those measured by a tensile test and are important in manufacturing as they may be used to simulate the service conditions, check the product’s quality and design, and ensure that it was manufactured correctly.
 
Types of torsion tests:
 
The three common forms that torsion testing take include failure, proof and operational. A torsion test for failure requires that the test sample be twisted until it breaks and is designed to measure the strength of the sample. A proof test is designed to observe the material under a specified torque load over a set period of time. Finally, operational testing is measures the material’s performance under the expected service conditions of its application. All of these forms of tests may be performed with either torsion only loading or a combination of torsion and axial (tension or compression) loading depending upon the characteristics to be measured.
 
Types of materials:
 
Many materials experience torques or torsional forces in their applications and so will benefit from or require torsion testing. Materials used in structural, biomedical and automotive applications are among the more common materials to experience torsion in their applications. These materials may be composed of metals, plastics, woods, polymers, composites, or ceramics among others and commonly take the forms of fasteners, rods, beams, tubes and wires.

Features:

1), Manual loading;
2), High precision torque sensor to measure torque, photoelectric encoder to measure torsion angle, digital display test result,
3), Simple structure, convenient operation, budgetary cost etc.,
4), Mainly used in research institute, engineering colleague and university etc.

\
           Typical steel wire torsion test diagram
Model NJS-5S
NJS-10S
NJS-20S
NJS-50S
NJS-100S
NJS-200S
Max. torque 5N.m
10N.m
20N.m
50N.m
100N.m
200N.m
Torque measuring range 2%---100% F.S
Torque indication accuracy ±1%
Torque resolution 0.01N.m 0.1N.m
Torsion angle Min. reading 0.1º
Max. torque angle 9999.9º
Effective test space 0~260mm
 (customized available)
Dimensions 920*300*300mm 950*330*400mm
Power supply 50Hz, 220V, Single phase
Weight 90Kg 120Kg
Frame
LCD Controller
Torque Sensor (5~200N.m)
Optical Displacement Sensor
Power Lines
Chuck
Operation Manual
ISO 7800: Metallic materials -- Wire -- Simple torsion test

ISO 6475: Implants for surgery -- Metal bone screws with asymmetrical thread and spherical under-surface -- Mechanical requirements and test methods.

ASTM F543: Standard Specification and Test Methods for Metallic Medical Bone Screws

ASTM F383 Static Bend and Torsion Testing of Intramedullary Rods

ASTM E2207 Axial-Torsional Fatigue Thin-Walled Tubular Materials Test Equipment

ASTM D5279 Thermoset & Thermoplastic Dynamic Torsion Testing Machine

ASTM D1043 Torsion Plastics Test Equipment

ASTM A938 Torsional Test of Wire
Your email address
Your message

contact
Email:
export@unitedtest.com
unitedtest@hotmail.com
Tel:
+86-10-57055071
+86-13911165373
SKYPE:unitedtest08
WhatsApp:
+86 13911165373
X