Your current locationHome > Products > Torsion testing machine
Products
Metal Wire Reverse Bend Testing Machine

JWJ series metallic materials wire reverse bend testing machine manly used to measure metal wire material, like steel wire, steel bar, steel wire rope, steel strand, nude electrical wire, copper alloy wire etc., rotate the provision radius jaws ±90 degree repeat the reverse bending test; standard machine for 3-10mm (15mm) diameter wire samples, add suitable device, can do 0.3 to 3mm wire.

Also can be used to do sheet plate repeating bending test.

Conform with standard ISO 7801, Metallic materials -- Wire -- Reverse bend test.
GOST 1579:  Wire. Methods of testing for bending

Other name: metal wire reverse bend test machine, steel reverse bend testing equipment.



 

Model JWJ-10 JWJ-15
Bending diameter 3-10mm
(0.3-3mm, need extra jaws)
3-15mm
(0.3-3mm, need extra jaws)
Sample length 300mm
Bending degree ±90º
Bending speed Less than 60 times/min.
Torsion angle Min. reading 0.1º
Power 1.1kw, 380V, 50HZ, 3 phase 3kw, 380V, 50HZ, 3 phase
Dimensions 700*460*1150mm
Weight 260Kg 280Kg
Mainframe,
Moving guide rail,
Deceleration motor,
Display system,
Jaws (Jaw base radius 10, 15, 20, 25),
Operation manual,
Certificate,
Packing list

ISO 7801: Metallic materials -- Wire -- Reverse bend test.
GOST 1579:  Wire. Methods of testing for bending

 

Your email address
Your message

contact
Email:
export@unitedtest.com
unitedtest@hotmail.com
Tel:
+86-10-57055071
+86-13911165373
SKYPE:unitedtest08
WhatsApp:
+86 13911165373
X